| Type number |
C12741-11 |
| Imaging device |
InGaAs sensor |
| Effective no. of pixels |
640 (H)×512 (V) |
| Cell size |
20 μm × 20 μm |
| Effective area |
12.8 mm (H) × 10.24 mm (V) |
| Full well capacity |
300 000 electrons |
| Readout speed |
7.2 frames/s |
| Readout noise |
500 electrons (rms: typ.) |
| Exposure time |
138.5 ms to 10 s (at Rolling shutter mode)
100 μs to 10 s (at Global shutter mode) |
| Cooling method |
Forced-air cooled / Water cooled |
| Cooling temperature |
−60 °C (Forced-air cooled)
−70 °C (Water cooled) |
| Dark current |
300 electrons/pixel/s (Air cooled (cooling temperature: -60 °C) typ.)
130 electrons/pixel/s (Water cooled (cooling temperature: -70 °C) typ.) |
| Binning |
2 × 2 , 4 × 4 |
| Camera control |
CameraLink |
| External trigger mode |
Edge trigger, Level trigger, Start trigger |
| External trigger input |
Yes |
| External trigger signal routing |
SMA / CameraLink I/F |
| Trigger delay function |
0 to 10 s (in 10 μs steps) |
| Trigger output |
3 programmable timing outputs, Trigger ready output, Global
exposure timing output |
| External signal output routing |
SMA |
| Image processing functions |
Background subtraction, Shading correction |
| External control interface |
CameraLink |
| Interface |
CameraLink base configuration |
| Software interface |
DCAM-SDK |
| Connector |
Mini-Camera Link |
| A/D converter |
16 bit |
| Lens mount |
C-mount |
| Power supply |
AC 100 V to AC 240 V, 50 Hz/60 Hz |
| Power consumption |
Approx. 150 VA |
| Ambient operating temperature |
0 °C to ＋40 °C * |
| Performance guaranteed temperature |
0 ˚C to +40 ˚C |
| Ambient storage temperature |
-10 °C to ＋50 °C |
| Ambient operating humidity |
30 % to 80 % (Forced-air cooled with no condensation) |
| Ambient storage humidity |
90 % max. (with no condensation) |
