MEMRECAM ACS-3 M16 高速相機(高速攝影機)

High Speed / High Resolution

  • 1280 X 896 (1M Pixel)
  • Megapixel resolution at 30,000fps

Faster Data Transfer

  • Fast Data Transfer USB3.0B
  • Fast Data Transfer to Optional SSD

High Sensitivity / High Quality

  • ISO 50,000 (Mono)
  • User Selectable Bit Depth

Compact

  • Dimension: 128W x 128H x 206D mm
  • Weight: Approx. 4.5kg



Specifications

 

Sensor 1.14M Pixel, CMOS
Active Pixel 1,280 x 896
ISO (REI) ISO 50,000 (Mono)
Electric Shutter 1/100~1/1,666,666 sec.
Memory 16GB / 32GB / 64GB
Memory Segment Up to 64 Segments
Bit Depth 8bit / 10bit / 12bit
Lens Mount F Mount (Support to Iris ring-less Lens)
C Mount*1, EF Mount *1
Video Output DisplayPort / 3G-SDI (Level A)
Input Signal Trigger (TTL/Contact) / EST / IRIG-B
Output Signal Status (ARM/FAULT) / Exp. Pulse (EPO) / Trigger OUT / VD OUT
Trigger Mode NORMAL / EVENT BURST / MULTI / LINEAR
Interface 1000BASE-T / USB3.0B / USB3.0 / USB2.0
Control PC
V-PAD*1 (11.6" Touch Screen Monitor)
Power 20-32VDC
Dimensions Approx. 128W x 128H x 206D mm (without protuberance)
Weight Approx. 4.5 kg
 

Sample Recording Times

ACS-3

FPS Quality Mode Speed Mode
H V Sec. H V Sec.
50~14,000 1280 896 --- 1280 896 ---
15,000 1280 800 1.42 1280 896 2.53
17,000 1280 720 1.39 1280 896 2.24
20,000 1280 608 1.40 1280 896 1.90
25,000 1280 480 1.42 1280 896 1.52
30,000 1280 384 1.48 1280 800 1.42
40,000 1280 272 1.57 1280 576 1.48
50,000 1280 224 1.52 1280 448 1.52
65,000 1280 160 1.64 1280 320 1.64
80,000 1280 128 1.66 1280 256 1.66
100,000 1280 80 2.13 1280 192 1.77
150,000 1280 48 2.37 1280 96 2.37
180,000 1280 32 2.96 1280 64 2.96
350,000 1280 16 3.04 1280 32 3.04
 

 

 

Features

Boost Mode/Boost4 Mode
Boost Mode*1 combines nac's unique sensor technology with a proprietary signal processing method to increase frame rate and resolution with little or no image degradation. This is a powerful tool for any application requiring higher frame rates and larger resolutions.

Boost up Frame Rate
@1280 x 800 pixels
Normal Mode: 14,000 fps -> Boost Mode: 25,000 fps -> Boost4 Mode: 50,000 fps

Boost up Resolutions
@50,000 fps
Normal Mode: 1280x224 pixels -> Boost Mode: 1280x448 pixels -> Boost4 Mode: 1280x896 pixels

*1 Boost Mode is currently available on monochrome models only.

High Light Sensitivity ISO 100,000
All ACS series cameras are equipped with state-of-the-art CMOS sensors featuring extremely high light sensitivity (monochrome ISO 100,000). Even in low light environments, the ACS produces bright, dynamic, and crisp images, making the ACS-3 M16 an ideal tool for high magnification and microscope applications – no need for bright lights on heat sensitive subjects.

 

 


MEMRECAM ACS-3


MEMRECAM HX-3

 

PC-less Operation
No PC, no problem! The ACS series V-PAD offers a beautiful HD viewfinder with full touchscreen camera control. Whether you are out in the field or in a restricted area where PC control is not practical, the V-PAD allows for full control of the ACS camera – from setup, to capture, to review, to saving – all with an intuitive touch screen interface.

Compact Standalone System
The ACS-3 provides many of the same features and benefits of its high-performing predecessor, the ACS-1, but in a smaller, lighter form factor. Compared to prior nac models like the MEMRECAM HX-3, the ACS-3 is a full 40% smaller and 30% lighter. The ACS-3 is a mobile and reliable system for almost any high-speed camera application.

Easy Synchronization of Multiple Cameras
With both SYNC-IN and SYNC-OUT connectors on its rear panel, the ACS offers incredibly simple and accurate camera synchronization. ACS cameras can be synchronized to each other using a single sync cable. No trigger distribution boxes or external sync devices are required.

Comparison Table of nac High-Speed Cameras

說明 檔案大小 下載
MEMRECAM ACS-3 M-16 型錄 123KB
型號 概述 詢價數量